Looking for solutions to a Ford Edge USB port that won’t work? Then you’re on the right page. If you’re wondering why your car’s USB isn’t giving your phone some battery juice, you’re not alone. Once in a while, this question pops up on Ford users’ forums and most Ford owners can’t seem to get the right fix.
That’s because there are a lot of reasons why your car’s USB port isn’t powering or charging your phone. You might notice this problem after buying a new car, after performing some repairs on your regular car, or even after changing USB cables.
Ford Edge USB Port Not Working: How to Fix
A failure in the functioning of the USB port can be traced back to many causes that result in shortcomings in the software or hardware. These fixes should help you solve this problem without spending too much time.
Turn the Car Off and Then On Again
This is probably the easiest fix. Sometimes all you need to do to get your car USB port working again is to turn the car off and then on again. In some cases, this would fix the problem easily.
Try A Different USB Cable
This is so obvious that you might have already done it yourself. However, when replacing your USB cable, you should always test it not just with your car but with another power source to see if it can charge from there. If it works somewhere else or in another car but doesn’t pick up when you plug it in your own car, then you can confirm that it is a problem with the car’s USB port.
Clean the USB Port
Your car’s USB port is one of the most exposed parts of the car making it more prone to particles falling inside and affecting its functions. Regardless of how clean or how principled you think you are with your car, dust and other debris will find a way into these ports one way or the other.
To solve this, you need to inspect the USB port of your car to make sure that nothing is getting in the way of making a proper connection.
If you notice something inside the port, get a toothpick or thin plastic that would easily pick out the debris and any other particle without damaging the internal parts of the port. With the USB port cleaned, wait for about 5 minutes before plugging in your phone and see if it works,
Tighten the USB Port
In some cases, the issue could be due to a loose USB port. To solve this, you would need to tighten the USB port for a stable connection. This is something you can do on your own so you won’t have to spend extra taking your vehicle for a maintenance check-up.
A loose connection is most likely the problem if your USB cable briefly connects and then disconnects. You should first check if the cable is faulty by replacing it. If the problem still persists, then you would have to tighten the port.
To do this, you would need a needle or any object with a sharp edge. For this fix, you will need some assistance from someone. Have them hold a torchlight or some sort of lighting to enable you to see the internal part of the USB port so you won’t make mistakes and completely ruin the port.
Look out for two-pin holders that serve as the support for the USB cable head when plugged into the port. These pin holders widen whenever the USB cable is plugged in. With consistent use, they would become too wide making your USB cable feel loose when plugged in, thus unable to maintain a stable connection.
Using the needle or any sharp-edged object you could find, pull up the pins gently in the upward direction. This will tighten the USB port allowing you to charge your phone.
