Wiper blades are very important even though they are among the most neglected parts of a vehicle. Most drivers overlook their wiper blades until they are stranded in a storm or blizzard with poor visibility. Do you know that your wiper blades can be your saving grace in a storm?
Imagine you are on a journey and a rainstorm begins suddenly. You flick on your wipers only to see that they aren’t working or they are making terrible streaks across the windshield. Continuing on that trip at the same speed as when visibility was clear will be completely impossible. You will either park somewhere to wait for the storm to pass or drive at a snail’s speed. Either way, you will miss the efficiency of good wipers.
You can save yourself this ordeal by changing your wiper blades frequently. To change your wiper blades, you need to consider several factors including their size. Getting the wrong size of wiper blades is tantamount to wasting money. It is only a matter of time before the blades damage your windshield or get spoilt. To save you from this, we have put together a list of Honda Element wiper blade specifications below:
- 2011 Honda Element Wiper Blade Size
- 2010 Honda Element Wiper Blade Size
- 2009 Honda Element Wiper Blade Size
- 2008 Honda Element Wiper Blade Size
- 2007 Honda Element Wiper Blade Size
- 2006 Honda Element Wiper Blade Size
- 2005 Honda Element Wiper Blade Size
- 2004 Honda Element Wiper Blade Size
- 2003 Honda Element Wiper Blade Size
- How to Replace Your Wiper Blades
- Step 1: Watch out for your wipers
- Step 2: Clean wiper blades that make streaks
- Step 3: Purchase new wiper blades
- Step 4: Get the new wipers ready
- Step 5: Get the wipers in position
- Step 6: Remove the old blades
- Step 7: Install your new wiper blades
- Step 8: Clean your windshield
2011 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2010 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2009 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2008 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2007 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2006 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2005 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2004 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
2003 Honda Element Wiper Blade Size
- Driver’s side: 20 inches
- Passenger side: 20 inches
- Rear: 11 inches
How to Replace Your Wiper Blades
The importance of wiper blades to the safety of a vehicle’s occupants cannot be overemphasized. These tools help rid your windshield of water, snow, dirt, debris, and other unwanted materials. As we mentioned earlier, you need to change your wiper blades at least twice every year.
The good news is you can carry out the replacement process by yourself instead of paying someone all the time. By the way, you get to enjoy the satisfaction of completing a DIY task with your hands. That being said, here are the items you need to install a new pair of wipers on your vehicle:
- Rubbing alcohol or water
- Two pieces of rags or paper towels
- Glass cleaner
- A pair of new wiper blades
Check the steps below to learn how to replace your wiper blades:
Step 1: Watch out for your wipers
Before anything else, you need to watch out for your current wiper blades. How they perform will show you when they need replacement. There are several signs you should watch out for. One of them includes a screeching, scratching, squeaking, or slapping sound while the wipers are in motion. Another is streaking on the windshield as the wipers work.
Your eyes and ears should be on the ground while your wipers are working. If you notice any of these signs, it means that it is time to replace your current wipers. However, whether they show these signs or not, note that you should replace your wiper blades every six months.
Step 2: Clean wiper blades that make streaks
If you notice that your wiper blades are making streaks on your windshield without making strange noises, you might not need to change them. This advice also comes in handy if you have only just replaced your wiper blades.
Several issues could make your wiper blades make streaks across the windshield. The blades could be covered with debris or dirt. On the other hand, the windshield could be dirty. We suggest that you get a clean rag or paper towel and dip it in some rubbing alcohol. Use the rag or towel to clean the wiper blade. Get some clean water and clean your windshield as well. Check the wiper blade after doing this, if it still makes streaks then you need to change them.
Step 3: Purchase new wiper blades
Now that you know that you need new wiper blades, it is time to go shopping. You can purchase new wipers online or from a retailer in your vicinity. Make sure that you purchase the right size of blades. Also, consider other factors like durability, mount, installation process, and type of wipers. You can check your car owner’s manual for directions or seek professional advice from the retailer.
Step 4: Get the new wipers ready
Great job! You have just bought your new wipers and you want to install them by yourself. We suggest that you get the new wipers ready before removing the old ones. Get the wipers out of their packaging and lay them on a table or some other flat surface in your workspace.
Step 5: Get the wipers in position
Enter your car and turn it on. Now, flick on the wipers and wait for them to get into an apex position before switching them off. Turn the vehicle off and go to your wipers. Lift the wiper arm from the windshield and turn the blade in a perpendicular position to the arm. Find the release tab and push it.
Step 6: Remove the old blades
After pushing the release tab, turn the blade in a parallel position to the wiper arm and pull it off gently. The process is pretty easy.
Step 7: Install your new wiper blades
Follow the process described above in reverse to install the new blades. Pick the blades and thread them into the slot on the wiper arm, turn them in a perpendicular position, and pull slightly until they lock in place.
Step 8: Clean your windshield
Use some clean water or glass cleaner and a clean rag or paper towel to wipe your windshield. Doing this helps to get rid of dirt. Now, slowly release the wipers on the windshield. Squirt some washer fluid onto the windshield and test the wiper blades.